|
Name (1)
|
|
■
|
The Alarm/event number as listed by product (usually matches the last digit in the trap OID) |
|
The alarm title.
|
|
TextualDescription(2)
|
|
Summary of the reported issue that is forwarded in the varbinds for the following alarm types:
|
■
|
OVOC: acEMSTrapGlobalsTextualDescription |
|
■
|
SBC: acBoardTrapGlobalsDeviceDescription |
|
■
|
ARM: acARMTrapGlobalsDeviceDescription |
|
■
|
Zoom: acZoomTrapGlobalsDeviceDescription |
|
|
Source (3)
|
|
■
|
(Devices + OVOC: currently defined as 0..100) |
|
■
|
The entity source of the problem, usually in the following format: |
|
✔
|
Entity1#x/Entity2#y/Entity3#z |
|
Possible values of sources if applicable to a specific alarm. This value is
displayed from the variable-binding tgTrapGlobalsSource.
|
|
Severity (4)
|
|
Possible severity value . This value is displayed from the variable-binding
tgTrapGlobalsSeverity.
|
|
UniqID (5)
|
|
■
|
The running number of alarms since the installation of the OVOC instance. |
|
■
|
The value of this number should be managed by the system separately for alarms and events. |
|
■
|
The Live Platform application uses this number to recognize if alarms were missed and to retrieve them using the Carrier-grade system. |
|
■
|
The forwarded information includes Live Platform alarms sequencing for NMS carrier-grade alarms: where the running number events: always -1 |
|
NOTIFICATION-TYPE OID as it appears in the MIB.
Corrective
Action
Possible corrective action when applicable.
- 1
|
|
Alarm ID
|
|
The unique database ID index for the alarm in the Live Platform portal database.
|
|
Type (6)
|
|
■
|
qualityOfServiceAlarm(2) |
|
■
|
processingErrorAlarm(3) |
|
■
|
operationalViolation(7) |
|
■
|
securityServiceOrMechanismViolation(9) |
|
■
|
timeDomainViolation(10) |
|
Alarm type according to ITU X.733 definition. This value is displayed from the
variable-binding tgTrapGlobalsType.
|
|
ProbableCause (7)
|
|
■
|
applicationSubsystemFailure(2) |
|
■
|
callEstablishmentError(4) |
|
■
|
communicationsProtocolError(5) |
|
■
|
communicationsSubsystemFailure(6) |
|
■
|
configurationOrCustomizationError(7) |
|
■
|
cpuCyclesLimitExceeded(10) |
|
■
|
dataSetOrModemError(11) |
|
■
|
dteDceInterfaceError(13) |
|
■
|
equipmentMalfunction(15) |
|
■
|
heatingVentCoolingSystemProblem(21) |
|
■
|
humidityUnacceptable(22) |
|
■
|
inputOutputDeviceError(23) |
|
■
|
localNodeTransmissionError(27) |
|
■
|
materialSupplyExhausted(30) |
|
■
|
performanceDegraded(34) |
|
■
|
pressureUnacceptable(36) |
|
■
|
remoteNodeTransmissionError(42) |
|
■
|
resourceAtOrNearingCapacity(43) |
|
■
|
responseTimeExecessive(44) |
|
■
|
retransmissionRateExcessive(45) |
|
■
|
softwareProgramAbnormallyTerminated(47) |
|
■
|
softwareProgramError(48) |
|
■
|
storageCapacityProblem(49) |
|
■
|
temperatureUnacceptable(50) |
|
■
|
underlyingResourceUnavailable(56) |
|
■
|
authenticationFailure(58) |
|
■
|
breachOfConfidentiality(59) |
|
■
|
duplicateInformation(63) |
|
■
|
informationModificationDetected(65) |
|
■
|
informationOutOfSequence(66) |
|
■
|
nonRepudiationFailure(69) |
|
■
|
unauthorizedAccessAttempt(73) |
|
■
|
unexpectedInformation(74) |
|
Alarm probable cause according to ITU X.733 definition. This value is displayed from the variable-binding tgTrapGlobalsProbableCause.
|
|
AdditionalInfo1 (8)
|
|
■
|
(Devices + OVOC: currently defined as 0..100) |
This field is used by the system to provide additional information regarding the reported alarm/event.
|
Additional information fields provided by MG application, depending on the specific scenario. These values are displayed from tgTrapGlobalsAdditionalInfo1.
|
|
AdditionalInfo2 (9)
|
|
■
|
(Devices + OVOC: currently defined as 0..100) |
This field is used by the system to provide additional information regarding the reported alarm/event.
|
Additional information fields provided by MG application, depending on the specific scenario. These values are displayed from tgTrapGlobalsAdditionalInfo2.
|
|
AdditionalInfo3 (10)
|
|
■
|
This field is used be the system to provide additional information regarding the reported alarm/event |
|
■
|
The forwarded information is filled in the following format: |
GW_IP: <Device IP>, GW_TRAP_ID: <device’s alarm unique ID>
|
Additional information fields provided by MG application, depending on the specific scenario. These values are displayed from tgTrapGlobalsAdditionalInfo3.
|
|
DateAndTime (11)
|
DateAndTime SNMP Object
|
The timestamp when the alarm was raised.
|
|
SystemSeverity (12)
|
Each value represents the entire system severity when a specific alarm/event is issued.
Note: This varbind is not sent for system alarms (alarms that were generated by OVOC such as OVOC Disk Space alarm).
|
Possible severity value . This value is displayed from the variable-binding
tgTrapGlobalsSeverity.
|
|
DeviceName(13)
|
|
■
|
(Devices+ OVOC: currently defined as 0..250) |
|
■
|
This field should not be filled by any of the products, as its reserved for OVOC when an alarm/event is forwarded. |
The information is filled in the following format:
MG Region:<EMS Region Name>, MG Name:<EMS MG Name>
<Entity Type> Name:<Entity Name>, Tenant:<Tenant Name>, Region:<Region Name>
Where entity type can be one of the following:
|
■
|
Tenant, Region, Site, Device, Link, System etc. |
|
■
|
Tenant: <Tenant Name> - exists only when the entity has tenant |
|
■
|
Region: <Region Name> - exists only when the entity has region |
|
The device entity name as described in the adjacent "Type" column.
|
|
DeviceInfo(14)
|
|
■
|
(Devices + OVOC: currently defined as 0..100) |
|
■
|
This field should not be filled by any of the products, as its reserved for OVOC when the alarm/event is forwarded. |
The information is filled in the following format:
MG Type: <Device Type>, MG Serial: <primary device serial number>, <secondary device serial number>
<secondary device serial number> is applicable for HA devices only
Device Type: <Device Type>
Empty if entity not a device
|
The detailed device identifiers.
|
|
DeviceDescription(15)
|
|
■
|
This field should not be filled by any of the products, as its reserved for OVOC when the alarm/event is forwarded. |
The information is filled in the following formats:
|
■
|
<Device Description> is filled when an alarm is raised on a Device entity. |
|
■
|
<SBA Description> is filled when an alarm is raised on the SBA entity (provisioned in the Device details under SBA definition rubric). |
|
■
|
<External application Description>: is filled when an alarm is raised on the ARM or Zoom entities. |
|
■
|
<Tenant Description> - is filled when an alarm is raised on a Tenant entity. |
|
■
|
<Region Description> - is filled when an alarm is raised on a Region entity. |
|
■
|
<Link Description> - is filled when an alarm is raised on a Link entity. |
|
Note: The hard-coded text description of the alarm that is sent in the TextualDescription(2) acEMSTrapGlobalsTextualDescription varbind (see above) is a separate description field that is different for each alarm OID.
|
|
SystemSerialNumber(16)
|
From Version 7.6:
OCTET STRING 0..255
The information is filled in the following format:
|
■
|
For Stand-alone systems: <Device serial number> |
|
■
|
For HA Systems: format <device serial #1>_<device serial #2>) |
Device Serial Number (displays either 32-bit and 64-bit serial numbers for SBC devices) according to the device's firmware version and configuration settings in the externals/configurationProperties/generalConfig file for the
include_serial_string.
|
Device serial number information as described in the adjacent 'Type" column.
|